The brake master cylinder, commonly referred to as the brake pump, is a critical component in a vehicle's braking system. It converts the mechanical force applied by the driver on the brake pedal into hydraulic pressure, which is then used to activate the brake calipers or brake drums, ultimately slowing down or stopping the vehicle.
Key Components
1. Reservoir: Stores brake fluid to ensure an adequate supply of hydraulic medium in the system.
2. Piston: Moves within the cylinder when the brake pedal is pressed, generating hydraulic pressure.
3. Seals: Prevent brake fluid leakage, ensuring the system remains airtight.
4. Return Spring: Helps the piston return to its original position once the brake pedal is released.
we have gravity casting automatic production line with robot pouring, each day 's output is larger and with high quality and
FTQ Qualified rate reach 99% ,without pore .
We also have assembling lines for complete assemble.
Our casting production line photos :
How It Works
1. Brake Pedal Pressed: When the driver presses the brake pedal, the force is transmitted through a linkage mechanism to push the piston inside the master cylinder.
2. Hydraulic Pressure Generated: The movement of the piston compresses the brake fluid, creating high hydraulic pressure.
3. Pressure Transmission: The high-pressure brake fluid is transmitted through brake lines to the brake calipers or drums at each wheel.
4. Braking Action: The hydraulic pressure forces the brake caliper pistons to clamp the brake pads against the brake rotors, or the brake shoes against the brake drums, creating friction that slows or stops the vehicle.
Common Issues
1. Brake Fluid Leaks: Caused by worn or damaged seals, leading to a loss of hydraulic pressure and reduced braking efficiency.
2. Piston Sticking: Dirt or corrosion can cause the piston to stick, resulting in abnormal brake pedal feel or brake failure.
3. Low Brake Fluid: Insufficient brake fluid in the reservoir can lead to inadequate hydraulic pressure, compromising braking performance.
Maintenance Tips
1. Regularly Check Brake Fluid: Ensure the brake fluid level is within the recommended range and replace old or contaminated fluid as needed.
2. Inspect Seals: Periodically check the condition of the seals and replace them if they show signs of wear or damage.
3. Keep the System Clean: Maintain cleanliness around the brake master cylinder to prevent dirt and debris from entering the system.
The proper functioning of the brake master cylinder is vital for vehicle safety. Regular inspections and maintenance are essential to ensure the braking system operates effectively. If any abnormalities are detected, immediate inspection and repair or replacement of components are recommended.
){kind=link}